Countertops in Antelope, CA

Countertops in Antelope: quartz kitchen countertops replacing original tile and builder laminate are the most common request, followed by island tops, bathroom vanity tops and slab backsplashes. Sacramento Select Countertops is a referral service that connects homeowners with independent, licensed countertop fabricators and installers. Almost everything here was built as one planned community from the late 1980s on, so many kitchens share the same layouts and the same dated finishes.

Updated kitchen in a 1990s valley tract home with light quartz counters on the perimeter and a peninsula

Quartz countertops for 1990s tract kitchens

The 2020-2024 American Community Survey puts the median home in Antelope at 1993. Kitchens from that era typically came with ceramic tile counters and a tile backsplash, or laminate, plus oak cabinets and a peninsula. Thirty years on, the cabinet boxes are usually sound, which makes a countertop-only update practical.

  1. Tear out tile or laminate. Tile is the slower, dustier removal; the old backsplash usually comes down with it.
  2. Check level and support. The fabricator confirms the cabinets are level and that a peninsula overhang is supported.
  3. Template and install. Templating to installation usually takes one to three weeks; a typical kitchen installs in one to two days.

Quartz is the default choice because it needs no sealing and suits painted or refaced oak cabinets. A typical kitchen has 30 to 50 sq ft of counter, which in quartz or granite usually lands between $2,500 and $7,500. See quartz countertops.

Peninsulas, islands and seating overhangs

Many floor plans here use a peninsula with a raised bar. A common update is to drop the bar to counter height and run one flat top with seating. Industry guidance limits an unsupported overhang to about 10 inches for 3 cm stone and 6 inches for 2 cm, and never more than a third of the top's width. Deeper seating needs corbels or hidden steel brackets. Layout options are on kitchen island countertops.

Matching vanities across several bathrooms

Two- and three-bath homes are the norm in the planned neighborhoods. Ordering all vanity tops with the kitchen lets the fabricator nest them on the same slab, so colors match and offcuts get used. A single vanity top typically costs $200 to $1,000 installed. See bathroom vanity tops.

Permits and local notes

Antelope is unincorporated, so permits go through Sacramento County. A like-for-like countertop replacement is finish work and generally does not need a permit. Moving a sink, adding a circuit or removing a wall to open a kitchen can, so confirm with the county if the layout changes.

A local footnote: before the planned community, Antelope was a post office, a general store and a few homes, and most of it was destroyed on April 28, 1973, when a rail car of aircraft bombs exploded in the Roseville rail yard. The community took its current name and boundaries by a 1993 vote. Tell us about your project and we pass it to a licensed fabricator who works here. For the regional overview, see quartz and granite countertops in Sacramento.

Countertops in Nearby Areas

See every town we cover on the service areas page.

Main guide: quartz and granite countertops in Sacramento.

Next step

Countertop quotes from a licensed local fabricator

Tell us your city, the material you have in mind and roughly how much counter you have. We pass it to an independent, licensed fabricator who serves your area; they contact you to measure and quote.

  • 01 Your request goes to a fabricator who serves your city.
  • 02 They call or email to book a measure and a written quote.
  • 03 You decide. There is no cost to request a match.
Call (916) 970-8536

Tell us about your counters

Sacramento Select Countertops is a referral service, not a licensed contractor. We share your request with an independent licensed fabricator who serves your area so they can contact you about your project. See our privacy policy.

FAQ

Countertop Questions

01

Can I remove the raised bar on my peninsula?

Usually, with a new single-level top. The raised knee wall may need to be cut down by a carpenter first, and any outlets in it must stay to code. The fabricator templates after that work.

02

How long will my kitchen be out of use?

Templating to installation usually takes one to three weeks, and the install itself one to two days. The sink is reconnected after the tops are set.

03

Can I keep my oak cabinets?

Yes, if they are sound and level. Many owners paint or reface them and put quartz on top.

04

Do I need a permit for new countertops?

A straight swap generally does not. Plumbing, electrical or wall changes can. Check with Sacramento County.

Call (916) 970-8536Price my countertops